HandTop HT3020UV-C-K, Руководство по эксплуатации

Страница: 52 / 97

51 / 97
Features Functions instructions
1.X&Y zero position setting value
；
2.X&Y printing position setting value
。
1. Fill
：
Print at blanks with white color
2. Base:Print with white color as a base layer of the whole
image
3.Base of image
：
Print with white color as a base layer of other
colors.
4.Overcoat
：
Print with white as a color layer above the whole
image
5 Overcoat of image
：
Print with white as a color layer above the
other colors
6.Spot
：
Set the white as spot, and output in spot mode
7.Overcoat of spot
：
Print with spot as a color layer above the
whole image
8.Middle layer
：
Image-white-image three layer print, the white
layer divides the two sides printed. Applied in some transparent
media.
9.Middle layer of image
：
Colors-white-colors three layer print,
the white layer divides the two sides printed. Applied in some
transparent media.
10.Middle layer of spot
：
Colors-white-colors three layer print,
the white layer divides the two sides printed. Applied in some
transparent media.
11.Color replace
：
Print with white as a substitution of the other
colors.
12.Varnish-overcoat
：
Print with varnish as a color layer above
the whole image
13.Varnish-overcoat of spot
：
Print with varnish as a color layer
above the other colors
14.Varnish replace
：
Print with varnish as a substitution of other
colors.
1. Print modes
：
Draft
、
Production
、
Quality
、
ink density
2. Directional
：
unidirection&bidirection
；
3. Screes
：
1.0
、
0.75
、
0.5
、
0.33
、
0.25
，
4. Ink density:1x 2x 3x
5.
Carriage speed
：
0.5,0.8,0.9,1.0
1. White ink control
，
smooth-high
：
2. Speed
：
normal printing speed and ink density is 1.0x,
changing the setting will change the both.
1. Solidify printing
：
in this function, print head will not printing
ink, only LED lamp will work