HandTop HT2500UV, Руководство по эксплуатации

Страница: 7 / 71

7
Wear rubber gloves to avoid chemical liquid spilled on human body.
Flush with adequate purified water immediately if accident happened and see a doctor afterwards.
Ink store
Keep the chemical consumables away from non-qualified individuals and stored according to the
specific instructions.
Continuous-flow drying awareness
To avoid printing issue and explosion risks,
only the inks and varnishes qualified by HANDTOP can be applied to the machinery.
Physical and chemical properties of HANDTOP inks
Specific Physical Form: Liquid General Physical Form: Liquid
Color: Y/M/C/K Odor: Acrylic odor
pH: N/AV Boiling Point: >120
℃
Decomposition Temperature: N/AV
Flash Point: >120
℃
(
Test Method: Closed Cup
)
Auto-ignition Temperature: N/AV Flammable Limits: N/AV
Vapor Pressure: <1mmHg@20
℃
Vapor Density: (Air = 1) >I
Specific Gravity: 1.01 Solubility in Water: Negligible
Solvents are not allowed to be placed on the printing area.
Solvents shall not be present at the printhead nozzle surface.
Exhaust system from the top of the machinery is needed to vacuum the hazardous ink mist.
Deposing waste ink and liquid
The treatment of the waste chemicals should abide by local environment regulations.
Emergency reaction
Always remember to press the scram stop at any emergency, and the printer should not be activated
until all the malfunctions are settled.
See Troubleshooting