HandTop HT2500UV, Руководство по эксплуатации

Страница: 60 / 71

60
4. Carriage moving malfunction
4.1 Carriage moving failure
There are error messages displayed on the screen of the servo driver.
Deal with the issue according to the corresponding information.
Below is the list of information display on screen of the servo driver and the corresponding
indication and troubleshooting.
Order Code Indication Troubleshooting
1 OC1 or OC2
Current
overload
Check and see power connection of the motor
2 OL1 or OL2 Overload Check and see power connection of the motor
3 Hu
Voltage
overload
Verified that the power input is within the rated
values
4 Fb Fuser break Replace the servo driver
5 AH
Amplifier
overheat
Keep the environment maintain below 40
℃
Keep the servo driver away from any heat resource
6 EH
Encoder
overheat
Keep the environment maintain below 40
℃
Remove any item baffles the heat dissipating of the
servo driver
7 LuP
Main circuit
voltage
defected
Check if there is any power supply interruption
Verify the power input stably with rated values
8 ¯PoF
Anti-crashing
& scram stop
activated
Check if any anti-crashing attachment or scram stop
activates, reset correspondingly.
9 ¯Pn0
Media locating
attachment
enabled
Check the media locating attachment and turn it
down if ever enabled
10 =Pot
Y-directional
origin
indicating
Check the opt-electric sensor if the code displays in
the Y-directional non-origin position
11 =PP1
Pulse signal
transmitting
(the state of
running)
Indicates a normal state during X-directional moving
Indicates a normal state of non-origin position