HandTop HT2500UV, Руководство по эксплуатации

Страница: 59 / 71

59
to reduce the possibility of deformation by strengthen the corresponding suction.
There is a certain distance between the Head Height Sensor and the datum point.
If the media is too small to be detected when placed near the datum point, you should put
the media on the location for head height founder first.
And move it to the printing position when head height adjustment accomplished.
Never try to lift the media positioning lever otherwise it may lead to head strike incident.
Besides the servomotor might come to an accidental stop by automatic protection and thus
result in printing failure.