P/N 100190, Rev. 1
Page 21
4
OPERATION
IN THIS CHAPTER:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -21
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -21
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -21
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -22
4.1
P
RE
-
OPERATION
CHECKS
Do the following checks before operating the machine:
1. Complete the risk assessment checklist in
2. Check that the work area is clear of non-essen-
tial personnel and equipment.
3. Check that the machine control/observation
area will not be in the path of hot flying chips
during machine operation.
4. Check the machine is securely mounted to the
workpiece, according to Section 3.3 on page 14.
5. Check that hoses and electric cords are routed
and secured to avoid tripping, entanglement,
damage from hot chips, or other damage should
an air hose or connection fail.
6. Check the cutting tool condition and sharpness.
7. On the in-line air lubricator, verify that oil is
present in the sight glass. (See Section 5.3.1)
8. Check that all hand tools are removed from
inside the machine and the work area.
4.2
O
PERATION
The BG44 Boiler Gun can machine both O.D. and I.D.
bevels and face or shorten pipes. Aside from the use of
different blades, operation is the same for all the
machining processes. See Section 2.2 for controls infor-
mation.
4.2.1
Pneumatic motor
To operate the BG44 Boiler Gun with the pneumatic
motor do the following:
1. Actuate the motor by unlocking the safety lock
then squeeze and hold the throttle lever.
2. With the other hand turn the crank handle or
the feed wrench to advance the cutting tool
into the workpiece.
3. Continue to turn either the crank handle or feed
wrench until the required machining is com-
plete. Base the feed rate on the motor’s feed-
back, if the RPMs drop or the machine stalls
slow the feed rate.
4. Once complete, allow the machine to make a
few revolutions without feeding the cutting tool
to clean up the machined surface.
5. Release the throttle lever to stop the machine.
6. Reverse the rotation of the crank handle or feed
wrench 2-3 revolutions to back the cutting tool
away from the workpiece.
7. To remove the BG44 from the workpiece do the
following:
F
IGURE
4-1. H
AND
POSITIONING
ON
THE
PNEUMATIC
BG44.
Содержание BOILER GUN BG44
