P/N 100190, Rev. 1
Page 15
4. Align the wedges sets with the slots in the cen-
ter shaft and seat the other ends on the wedge
guide.
3.2.1.2
Interchanging the .875” and 1.200”
wedge mounting systems
The .875” wedge mounting system uses a dedicated
center shaft.
Do the following to change between a 1.200” wedge set
and the .875” wedge set:
1. Return the machine to a solid support for
removal and installation of the wedge sets.
2. Remove the jam nut from the end of the locking
rod.
3. Remove the locking rod wrench from the locking
rod. The direction of the ratchet mechanism
may need to be switched to feed off instead of
on.
4. Slide the wedge set with locking rod out of the
center shaft from the wedge end of the
machine.
5. On the crank feed machine, turn the crank
opposite of the feed direction until the threads
of the center shaft are free of the feed nut.
On the wrench feed machine, turn the wrench
opposite of the feed direction until the threads
of the center shaft are free of the feed nut.
6. Slide the center shaft out from the front of the
machine.
7. Insert the center shaft of the .875” wedge set,
threaded end first, through the tool holder and
into center shaft lock, aligning the slots in the
threaded shaft with splines in the center shaft
lock. Continue to insert the center shaft until it
stops against the feed nut.
8. On the crank feed machine, turn the crank to
advance the center shaft.
On the wrench feed machine, turn the wrench
to advance the center shaft. The direction of
the ratchet mechanism may need switched to
feed in instead of off.
9. Advance the center shaft until approximately
.50” (12.7mm) of threads protrude past the rear
of the machine or the feed wrench.
10. Reinstall the locking rod wrench until .50”
(12.7mm) of the locking rod protrudes.
F
IGURE
3-3. I
NSTALLED
WEDGE
SET
F
IGURE
3-4. T
HE
.875
WEDGE
SET
Содержание BOILER GUN BG44
