manualshive.com logo in svg
background image

-26-

WARNING:

MAKE SURE THAT THE TRACTOR IS SHUT OFF AND THE RAKE CANNOT MOVE        

BEFORE  SERVICING  THE  RAKE.  MAINTENANCE  AND  REPAIR  SERVICE  WORK                       

TO BE PERFORMED BY A QUALIFIED SERVICE PERSON ONLY.

PROBLEM 

  CAUSE    REMEDY

Optional one-sided raking     

Rotate optional one-sided raking 

hydraulic valve is in closed    

hydraulic valve to open position

position 

Hydraulic coupler hoses not    

Couple hoses to tractor

coupled to tractor properly   

 

Not enough tractor hydraulic   

Replace tractor with tractor that has

pressure    recommended 

hydraulics

Hydraulic coupler not coupled  

Couple hose to tractor

to tractor properly

Tractor hydraulics do not  

 

Tractor should have at least 1,875

have sufficient pressure 

 

psi to operate rake & 7 GPM’s

Optional one-sided raking     

Rotate optional one-sided raking 

hydraulic valve is in closed    

hydraulic valve to open position

position

Hydraulic valve is shut off 

 

Turn hydraulic valve on

Not enough rake wheel 

 

Adjust down pressure per Operation

down pressure 

 

 

and Adjustment Chapter

Too much rake wheel   

 

Adjust down pressure to lighten rake  

down pressure 

 

 

wheel pressure per Operation and  

     Adjustment 

Chapter

Rake windrow width adjusted  

Adjust rake windrow width per

too wide. 

 

 

 

Operation and Adjustment Chapter

Rake windrow width adjusted  

Adjust rake windrow width per

too narrow.   

 

 

Operation and Adjustment Chapter

No center kicker wheel installed 

Install center kicker wheel assembly

on rake to disturb the crop

Rake lifting arms will not 

lower 

Rake lifting arms will not 

raise 

NOTE: 

This 

Troubleshooting Chapter presents problems, causes and suggested remedies beyond the 

extent of loose, worn or missing parts. It was developed with the understanding that the machine is in 

otherwise good operating condition.

TROUBLESHOOTING

Center Kicker Wheel will 

not raise or lower

Rake wheels leaving hay 

on the ground

Rake wheels digging dirt/

ash content

Finished windrow too 

wide for baler

Hay carrying around on 

the last set of rake wheels

Baler is not picking up 

the hay that wasn’t raked 

between the rear rake 

wheels

Содержание 3210

































Отзывы: