MAINTENANCE AND TROUBLESHOOTING
-
Ⅳ
-
2. Selection of synergic parameters:
1) In the main interface, press the MENU key to enter the synergic parameter selection
interface;
2) In the synergic parameter selection interface, rotate L Knob to select the required synergic
parameters and press it for confirmation in the interface shown below:
3. Selection and setting of welding parameters:
1) In the main interface, press the MENU key to enter the welding parameter setting interface;
2) In the welding parameter setting interface, rotate L Knob to select the parameter as
required and rotate R Knob to set a value for the parameter. Press L Knob or R Knob for
confirmation in the interface shown below:
Welding parameters
available by rotating L
Knob
Welding parameters
available by rotating R
Knob
Two/four Stroke
2T/4T
Burn Back
0-10
Slow Feed
0-10
Pre-flow
0-2 S
Post Flow
0-10 S
Inductance
0-10
Fig. 2
