GB
82
Refer to the chimney installation instructions. The
following describes how the chimney system is
connected to the stove.
The stove body is prepared for top connection on
delivery. When connecting from the rear, the cover and
connection must be swapped around.
Top connection to the chimney
When connecting to the top, the whole stove surround
must be installed before installation of the chimney can
begin. Installation of the surrounds for the respective
models is described later on in these installation
instructions.
The start pipe is placed over the connection on the
insert. Make sure that the gasket on the connection is
intact and in position. The stop washer is positioned over
the collar on the start pipe. The cuff must rest against
the top of the stove. Then install the remaining parts of
the chimney. The cuff covers the lower section of the
start pipe and facilitates any service work.
Connection to chimney
Chimney mantle
Cuff
Stop washer
Start pipe
