Handife Q1P-CX49-380, Инструкция по эксплуатации

Страница: 12 / 58

EN-9
Problem Cause Solution Problem Cause Solution Problem Cause Solution
A. little or no material flow
B. material leaking
1. nozzle clogged
2. suction tube clogged
3. material volume setting
4. suction tube loose
5. material is too thick
6. container is loose
1. nozzle loose
2.nozzle broken
3.nozzle seal broken
1. viscosity too large
2.volume too large
3.nozzle clogged
4.pressure not enough
1.material in container is running out
2. material is too thick
1. spraying too much
1. spray distance too far
2. too much material in container
1.clean the nozzle
2. clean the suction tube
3. adjust the nut
4. adjust the suction
5.check viscosity
6. tighten the container
1. tighten
2. replace
3.replace
1.thin
2.adjust the nut
3.clean
4. tighten container
1. refill
2. check viscosity
1. move the spray gun smoothly
1. reduce spray distance
2. re-fill the container
1. moving the spray gun too fast
1 spray distance too close
1. adjust material flow or decrease
movement of spray gun
1. move gun away from surface
and reduce paint flow
C. droplet too large
D. spray pulsates
E. pattern runs or sags
F. too much over-spray
G. pattern is light and splotchy
H. large spray spot
Troubleshooting