180 cm
Emergency Stop Strap
When the lift is correctly installed in the trolley system, the emergency
stop strap needs to be adjusted. The emergency stop strap is cut at a
height where the strap doesn´t interfere with a normal lifting situation but
at the same time is easily reached by all users.
The strap is cut with scissors and singed at the end as to prevent unravel.
Handicare recommends a height of 180 cm/70 inches above the floor.
Assembly of charger unit
The following is included in the charger station package:
•
Holder
•
Charger cup
Charger cable (EU, UK, US connectors included)
(fixtures between charger station and wall/freestanding rail not included)
Charger station
a) Secure holder to charger station on wall/freestanding rail system, fig 1. Recommended height is 110-120 cm from
floor.
b) Snap the cable connectors onto the lift unit’s charger cable, fig 2.
c) Mount the cable connectors with the charger cable on the underside of the charger cup, fig 3.
Use the accompanying screws.
d) Snap the charger cup in place in the holder for the charger station, fig 4.
e) Connect the accompanying hand control to the charger station and the hand control cable to the lift unit, Figure 5.
Check charger function.
1
2
3
4
4
M A N U A L System
RoMedic
TM
