27
S E R V I C E M A N U A L
System
RoMedic
TM
1.15 Actuator Motor Wiring Trip
This occurs when the control system detects a fault in the wiring to either actuator motor. Check the motor connectors
and wiring. If the trip is still present after the above checks have been made, then the Power Module may be defective.
1.16 Current Limit Active
This occurs when the control system operates above the Current Limit Threshold for a period of time greater than the
Current Limit Time. It has been designed to notify the Healthcare Technician that the control system has operated
outside of its programmed range.
1.17 High Temperature
This occurs when the control system reaches its Temperature Threshold and thus becomes too hot. The controller will
not allow drive until the controller has cooled down. An entry is made in the system log each time the controller gets too
hot and goes out of drive.
