Handicare 1003063D, Руководство пользователя, Страница: 39 / 88

Specifications
39
Hippo
ISO standard Min Max
7176-7 (Dis 1998) Arm-rest height [mm] 165 245
7176-7 (Dis 1998) Arm-rest depth [mm] 70 na
7176-7 (Dis 1998) Hoop diameter (outer diameter bent part) [mm] N/A N/A
7176-7 (Dis 1998)
Horizontal location of rear axle (in relation to
intersection RLG)
[mm] N/A N/A
7176-5 Minimum radius (total diameter) [mm] 1000 ----
7176-10 (down) Capacity to take obstacles (down) [mm] 80 ----
EN12184
(1999)
Appendix A
Maximum obstacle (free space underneath
wheelchair)
[mm] 70 ----
7176-5 Turning space [mm] 1000 ----
ISO 7176-14 Speed-control system operating power [N] 1,5 ----
N/A Not applicable
na Not available
min/max Concerns setting limits. If fixed value, only "minimum" is entered,
and at "maximum" ----
The wheelchair meets the requirements of the following standards:

Static, impact and fatigue stability according to ISO 7176-8,
Yes


Drive and control systems for electric wheelchairs according to
ISO 7176-14,
Yes


Climate test according to ISO 7176-9
Yes


Fire-resistance requirements according to ISO 7176-16.
Yes

4.2 Physical conditions of use
To the Hippo applies ambient temperature
-10 to +40 degrees Celsius, suitable for Dutch climate
4.3 Applied regulations and standards
This wheelchair has been provided with the CE mark. This means that this wheelchair
meets the current applicable European health and safety guidelines. In the
"Declaration of Agreement" (see page
Fout! Bladwijzer niet gedefinieerd. ) these
guidelines are indicated.
The "Declaration of Agreement" also contains the standards that were applied.
In addition, the wheelchair meets:

GQ (Certification Requirement R-06 of the KBOH).