Lube #1 (Red) Kluber Constant OY 68,
the transmission shaft bearings followed
by Lube #2 (Blue) Mikrozella G8 0Y, as
before stated.
Apply one drop of Lube #6 (Purple), to the raceway of the bobbin
case support two to three times per day. This application is
based upon sewing for 8 hours of machine time. If the machine is
used less, lubricate the hook less frequently. After the lubrication
of the hook, it is recommended that one momentarily sew on
scrap material before resuming the sewing of the quilt. Failure to
do so may result in oil stains on the quilt piece.
Apply Lube #5 (Orange) Kluber
GLY 151 on the Delrin gear to
provide a dampening lubricant for
noise reduction.
Lube #2 Blue
Lube #1 Red
0.2
Lube #4 (Green)
Kluber Isoflex NCA-15, the belt idler wheel
needle bearings
.
