handi quilter Fusion QM32469 Скачать руководство пользователя

Страница: 4 / 46

02/10/2015

4 | HQ Fusion User Manual

www.HandiQuilter.com

Safety Section

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

NOTE

: Do not operate your HQ Fusion® quilting machine until you have completely read the

information contained in this manual. Please keep all packaging and order information for warranty

purposes.

MPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this machine.

When using this machine, basic safety precautions should always be followed, including the following:

ANGER

— To reduce the risk of electric shock:

•

A quilting machine should never be left unattended when plugged in. Always unplug the machine from

the electrical outlet immediately after using and before cleaning.

ARNING

— To reduce the risk of burns, fire, electric shock, or injury to persons:

•

The HQ Fusion is heavy. Never attempt to lift it alone. Always use two people when lifting. Always

lift from the throat of the machine, not from the handlebars.

•

Always unplug the HQ Fusion from the electrical outlet when performing any maintenance,

changing the needle, removing thread locks, or when left unattended.

•

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

•

Keep fingers away from all moving parts. Use caution around the needle or sharp external

components.

•

Change the needle often. Do not use bent or dull needles. “Every quilt deserves a new needle”.

•

Switch the machine to the symbol off, or 0, position to turn it off when making any adjustments in

the needle area, such as threading needle, changing needle, threading bobbin, changing hopping

foot, and so forth.

•

Never drop or insert foreign objects into any opening.

•

The HQ Fusion should only be used indoors away from moisture.

•

The HQ Fusion should not be stored or used in extreme temperatures.

• Use the HQ Fusion only for its intended use as described in this manual.

•

To disconnect from the wall outlet, push the switch to the off position, then remove the plug from

outlet pulling from the plug, not the cord. Never operate the HQ Fusion if the cord is damaged or

not working correctly. If a mechanical or electrical problem is encountered, return the HQ Fusion

to the nearest authorized service center or the manufacturer for examination, repair, electrical, or

mechanical adjustment.

•

It is not recommended that the HQ Fusion quilting machine be used with any machine quilting

frame other than those recommended by Handi Quilter.

•

Use this quilting machine only for its intended use as described in this manual. Use only

attachments recommended by the manufacturer as contained in this manual.

•

Never operate the machine with any air openings blocked. Keep ventilation openings of the

machine free from the accumulation of lint, dust, and loose cloth.

•

Do not operate where aerosol (spray) products are being used or where oxygen is being

administered.

Содержание Fusion QM32469















































Результаты поиска

Содержание Fusion QM32469

Отзывы:

Похожие инструкции для Fusion QM32469

Бренды по названию

Популярные бренды

handi quilter Fusion QM32469, Руководство пользователя

Результаты поиска

Содержание Fusion QM32469

Отзывы:

Похожие инструкции для Fusion QM32469

Бренды по названию

Популярные бренды