handi quilter Avante QM30235, Руководство пользователя

Страница: 14 / 40

Page 14
HQ
18
Avanté User Manual
1. An optional horizontal spool pin is available for
metallic and specialty threads wound on a spool
(not a cone).
2. The horizontal spool pin mounts on the laser
stylus guide post on the top of the machine (see
Figure 146.
3. When using threads on the Horizontal Spool
Holder, skip thread guide A. Thread the top hole
only of the three-hole thread guide B, back to
front.
4. Continue threading the machine as described in
steps 3 through 7 on page 13.
Optional Horizontal Spool Pin
Inserting the Bobbin
Note: Turn off the power switch while inserting the
bobbin case or anytime your hands are near the
needle area.
1. Place the bobbin in the bobbin case so that the
thread pulls off clockwise when viewing the open
side (Figure 17).
2. Slide the thread through the slot (Figure 18) and
under the tension spring leaving 5-6 inches of
thread hanging loose (Figure 19, next page).
Bobbin and Thread Tension
Adjustments
Figure xx
Note: See “HQ Quilting Machines Getting Started”
DVD (included with your machine) for videos show-
ing adjusting bobbin tension and other tips. These
videos are also available on www.HandiQuilter.com.
Figure 16 Figure 17
Figure 18