CPS-Q5 User Manual
22
Room Monitor Password
1. Scroll using the
button to room monitor password, press
, By
default the room monitor password is “9999”. You may change this password
to any four numbers of your choice, then press
.
•
If the password is set to “9999” the phone will automatically pick up in speaker
mode after the first ring and will interrupt/disconnect any call already in progress.
•
You must change the room monitoring password to any other code (BUT NOT
9999), for example 1234.
•
The calling party will now hear this announcement: “Hello, please enter the
access code”.
The call party will need now to enter the correct 4 digits access code set in the
system. After entering the correct access code the CPS-Q5 system will now
monitor the room in speaker mode.
•
If the access code has been entered incorrectly, the unit will automatically
disconnect the call (after 10 seconds).
•
When a room monitor call has ended by the calling party, the line will
automatically disconnect, without pressing any buttons.
•
When room monitor status is set to “ON”, the phone may be used as normal.
However, when the calling party is monitoring the end user, the phone buttons
will be locked. Only the SOS function is active.
•
During ECI (Emergency Call Interruption): the calling party may control the unit
with the following keypad (DTMF tone) shortcuts below:
** mute the microphone – with digit / number 6
** Speaker volume off – with digit / number 4 XV
** Normal hands free – with digit / number 5 (This one is default mode)
0nly the call party can end the call; cancellation by end user side can be done only
through SOS button.
Priority Contact Numbers
The user may enter a total of five (5) contact numbers. When any of the priority
contacts are calling in the system will automatically answer the phone in hands free
mode by detecting the CallerID.
