CPS-Q5 User Manual
17
1.
Status
, press
, (default setting is On). If you choose to change this setting
highlight either On or Off and press
.
2.
Number
, Scroll down to number and press
, press
again and enter
the numbers (up to three) that you want the unit to dial with a voice
announcement when the Communicator’s battery is low and press
again.
3.
Pendant/Communicator Voice Language
, press
, (English is set as the
default language).
1.
To change the language, select the language of your choice, press
.
HS Setting (Handset Setting)
1.
In standby mode, press
and then highlight “Settings”.
2.
Enter the access code (0000) press
and you are in Settings main menu.
3.
Press
, select HS Settings and press
,
Select Base
1.
You can register the handset to different bases. The handset is already registered to
the base (base #1). It is recommended that the handset stay registered to base #1.
2.
When you want to register the handset or additional handsets to other bases, you
may need to purchase additional bases first.
HS Name (Handset Name)
1.
You may name the handset or leave it empty.
2.
Press
and by using the characters on the keypad, input the desired name. You
may use up to 10 characters in the handset name for example: “Kitchen”. When
finished press
to save and confirm.
