OWNER'S MANUAL
20
Connection the TV Cable
Connect the TV antenna cable to the TV input jack. Press INPUT button on the
remote control and select TV on OSD.
Use PG+, PG- button or numeric key to change TV programme for your
programme selection.
Press Pre PG key on the remote control to tune the previous programme.
Also, you can tune to cable service provided programmes using the cable box.
For further information regarding cable TV service, contact cable TV service
provider(s).
Watching TV
The Function of SCART2 Port
This signal of SCART2 port takes first priority over other input signals.
When an outer device which is connected to SCART2 port is "Power On", the monitor will automatically
display the signal of SCART2 port.
The display mode (4:3, 16:9) will be automatically recognized until users purposely change the display
mode. When users operate up/down button or numeric button on the remote control, input source is
changed to TV mode automatically.
The SCART2 recognizes automatically both composite signal and RGB signal.
