manualshive.com logo in svg

Hand Held Products Dolphin 7900 Series, Руководство пользователя, Страница: 244 / 264

Поделиться
Скачать
Hand Held Products Dolphin 7900 Series Скачать руководство пользователя страница 244

14 - 6

Dolphin® 7900 Series Mobile Computer User’s Guide

Mounting the Dolphin Mobile Base

There are three items you use to mount the Dolphin Mobile Base: the ball joints on the both the back panel and the ball joint 
connector, the mounting bracket, and the turnscrew.

Turnscrew

The turnscrew is located on the top of the bracket. Rotate the turnscrew to secure or loosen the ball joint slots.

Mounting Bracket

The bracket contains the turnscrew and two slots - one for the ball joint on the back panel and one for the ball joint 
connector. Both ball joints are inserted into a slot and secured with the turnscrew.

Ball Joint Connector

The ball joint is what you attach to the mounting surface. It is comprised of a ball joint and flat disk. The disk contains 
drill holes you use to secure the Mobile Base to the mounting surface.

Turnscrew

Mounting Bracket

Ball Joint 
Connector

Latch - securing the 
terminal

Содержание Dolphin 7900 Series









































































































































































































































































Отзывы:

Нет отзывов