Hand Held Products Dolphin 7900 Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 264

Hand Held Products Dolphin 7900 Series Скачать руководство пользователя страница 20

2 - 2

Dolphin® 7900 Series Mobile Computer User’s Guide

Dolphin 7900 Radio Configuration Options

Standard Configurations

Dolphin 7900 WLAN and WPAN (802.11b and Bluetooth)

This terminal features co-located 802.11b and Bluetooth radios, which means that your terminal contains the
capabilities of both radios. You can operate the radios simultaneously or switch between them.

Dolphin 7900 WWAN and WLAN (GSM/GPRS and 802.11b)

This terminal features the functionality of both GSM/GPRS and 802.11b radio and network technologies.

Dolphin 7900 WWAN and WPAN (GSM/GPRS and Bluetooth)

This terminal features the functionality of both GSM/GPRS and Bluetooth radio and network technologies.

Dolphin 7900 WWAN, WLAN, and WPAN (GSM/GPRS, 802.11b, and Bluetooth)

This terminal features the functionality of GSM/GPRS, 802.11b, and Bluetooth radio and network technologies.

Custom Configurations

Please refer to the Dolphin 7900 pricing configuration guide or contact your Customer Account Representative (CAR) for details.

Dolphin 7900 WLAN (802.11b)

These terminals integrate the basic functionality of the Batch terminals with an integrated, IEEE 802.11b direct
sequence radio that enable communication with a host computer through a wireless local area network (WLAN).

Dolphin 7900 WPAN (Bluetooth)

This terminal allows Bluetooth communications to Bluetooth enabled devices such as printers, mobile phones,
Access Points (APs), Bluetooth-enabled PCs, etc.

Dolphin 7900 WWAN (GSM/GPRS)

This terminal features all the benefits of the Dolphin 7900 with the additional capabilities of GSM/GPRS technology.

«
...
18
19
20
21
22
...
»

Содержание Dolphin 7900 Series









































































































































































































































































Отзывы:

Нет отзывов