Hamworthy F175H, Инструкция по установке, вводу в эксплуатацию и эксплуатации

Страница: 63 / 78

HAMWORTHY HEATING LTD
57
FLEET H series 500001216/D
Figure C5.1 - Cascade
flue system 250mm Ø
Table C5.1 - Cascade Flue equivalent lengths - refer to fig. C5.1
Flue Header Flue Header
Equivalent lengths (m) ‐ flue pipe
Load kW Size mm Max L 45° 90°
350 250 100 5 6.5
400 250 100 5 6.5
600 250 75 5 6.5
800 ‐ Max 250 50 5 6.5
175 ‐ 350kW (130/250mm)
Cascade flue kit
Extension kit
HHL Part no
562511095
Options:
130Ø * 1m straight ‐ st/steel 532511220
250Ø * 1m straight ‐ st/steel 532511213
250Ø 87° Elbow ‐ st/steel 532511208
250Ø 45° Elbow ‐ st/steel 532511203
562511097
250/300Ø Expander ‐ st/steel 532511224
300Ø * 1m straight ‐ st/steel 532511216
300Ø 87° Elbow ‐ st/steel 532511209
300Ø 45° Elbow ‐ st/steel 532511204
Flue Header Flue
Equivalent lengths (m) ‐ flue pipe
Load kW Size mm Max L 45° 90°
350 300 100 4 5
400 300 100 4 5
600 300 100 4 5
800 300 90 4 5
1000 300 50 4 5
1200 ‐ Max 300 30 4 5
750 crs
15
00 m
in
.
225 300 min.
400 min.
140
Concentric Flue - Cuttable extension pieces
When cutting a concentric flue extension piece,
care must be taken to ensure that the inner section
is always cut 10mm longer than the outer section to
allow sections to be joined correctly.
Do not cut all the way through both sections at the
same length. Cut the outer section first and then
the inner section 10mm longer.