Hamwells HomeSpa, Руководство пользователя

Страница: 50 / 53

HomeSpa user manual | 2020 v1.5
50
00 pump
• Problem: The pump has tried to start up several times but no running water is being measured.
• Effects: The FreshCycles mode will automatically close and shower will continue in classic mode,
rinsing will be aborted.
• Solution: Check filter and water levels. Possibly faulty flow meter.
01 NTC temperature
• Probleem: A temperature sensor has a temperature above 80 °C. This is not physically possible.
• Gevolgen: The hot water safety will be activated automatically.
• Solution: Check temperature sensors and connections
A
Terug
00 pump : OK
01 NTC temperauture : OK
02 NTC connection : OK
03 thermostat position : OK
04 Thermostat temperature : error
05 water level : OK
06 PID : OK
07 cleaner : OK
08 safety switch : OK
09 smart stop timeout : OK
0A UV lamp : OK
0B Temperature request : OK
You can see the list on the following
pages with warnings/error messages
and the corresponding solutions.
List with
error messages