16
2022_001
6
Pump to reach the required load unto the workpiece.
Use the pressure gauge to do a check of the load.
Refer to “8 Technical data” on page 16 for
maximum load of the product.
7
Open the release valve and let the piston return to
start position.
8
Remove the workpiece from the press.
5
Maintenance
5.1 To do maintenance of the product
●
Lubricate the mechanical parts with machine oil. Use an
oil can.
●
If the effect of the product decrease, remove air from the
hydraulic system. Refer to “4.1 To do before first use” on
page 15.
●
Regulary do a check of the oil level. Refer to “5.2 To do a
check of the oil level” on page 16.
5.2 To do a check of the oil level
1
Remove the plug from the top of the oil tank.
2
Do a check of the oil level.
3
If necessary, fill with hydraulic jack oil of god quality.
4
Install the plug to the top of the oil tank.
6
Storage
●
Keep the product in a dry and cool area.
7
Disposal
7.1 To discard the product
Make sure that you follow local regulations when you
discard the product. Do not burn the product.
8
Technical data
Technical data
Maximum load
20 ton
Bed opening
100 mm
Work range
0–910 mm
Stroke length
175 mm
Inside bed dimensions (L x W)
100 x 540 mm
Dimensions (L x W x H)
760 x 700 x 1810 mm
