EN
13
2. Fit the rear cover. Align the dot on the
bulb with the groove on the right-hand
side of the adapter. Insert the bulb in the
adapter so that it locks in place. Connect
the original connector and connect the
ballast.
FIG. 4
3. Fit the ballast with cable ties or double
sided tape.
FIG. 5
Installation by the original bulb
inside the rear cover
1. Turn the LED bulb’s base anti-clockwise
separate it from the adapter. Remove the
original bulbs and fit the H4 adapter in
the headlight casing.
FIG. 6
2. Align the dot on the bulb with the groove
on the right-hand side of the adapter.
Insert the bulb in the adapter so that
it locks in place. Connect the original
connector and connect the ballast.
FIG. 7
3. Fit the ballast with double sided tape and
refit the rear cover.
FIG. 8
TROUBLESHOOTING
Check the following items if the LED bulbs do
not work correctly.
• Check that all the connections are correct.
• Check that the lighting switch is in the on
position.
• Check that the battery is not discharged.
