Installing the Mounting
Plate
Step 1
. Remove 1 of the 3 screws from the
mounting ring and loosen the other 2 screws. (Do
not remove)
Step 2
. Place the key holes on the mounting plate
over the 2 screws previously loosened from the
mounting ring, turn mounting plate until it locks
in place at the narrow section of the key holes.
Secure by tightening the 2 screws previously
loosened and the one previously removed. (Fig.
13)
7.
Attaching the Fan Blades
Insert the blade through the slots in the bottom
band. Align the holes from the blade to the holes
from the motor and secure in place with screws
provided. (Figure 12)
Figure 12
Fiber washer
Screws
Blade
Slot
Figure 13
Moounting plate
Mounting ring
Screws