4. The " " button is used to set the fan forward
or reverse, press the button forward (for warm
weather) or reverse (for cool weather):
Speed settings for warm or cold weather depend
on factors such as room size, ceiling height and
number of fans, etc.
NOTE
: To operate the reverse function on this
fan, press the reverse button while the fan is
running.
Warm weather
- (Counter-Clockwise direction)
A downward air flow creates a cooling effect as
shown in Figure 18. This allows you to set your
air conditioner on a higher setting without
affecting your comfort.
Cool weather
- (Clockwise direction) An
upward airflow moves warm air off the ceiling
area as shown in Figure 19. This allows you to
set your heating unit on a lower setting without
affecting your comfort.
Restore power to the ceiling fan and test for
proper operation.
1. "
HI, MED, LOW"
buttons: These three buttons
are used to set the fan speed as follows:
HI
= High speed
MED
= Medium speed
LOW
= Low speed
2.
"OFF"
button: This button turns the fan off.
3. The " " button turns the light ON or OFF
and also controls the brightness setting. Press
and release the button to turn the light ON or
OFF. Press and hold the button to set the
desired brightness. The light key has an
auto-resume, it will stay at the same brightness
as the last time it was turned off.
Figure 17
9. Operating Your Transmitter
Installing the battery:
Install
12V MN21/A23
battery (not included), to
prevent damage to transmitter, remove the battery
if not used for long periods.
Figure 16
