manualshive.com logo in svg
background image

Date Purchased 

Store Purchased

Model No.

Serial No.

Vendor No.

UPC

Hampton Bay Lifetime Limited Warranty

The retailer warrants the fan motor to be free from defects in workmanship and material present at time 
of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The 
retailer also warrants that all other fan parts, excluding any glass or plexiglass blades, to be free from 
defects in workmanship and material at the time of shipment from the factory for a period of one year 
after the date of purchase by the original purchaser. We agree to correct such defects without charge or 
at our option replace with a comparable or superior model if the product is returned to the retailer. To 
obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of 
removing and reinstalling the product are your responsibility. Damage to any part such as by accident 
or misuse or improper installation or by affixing any accessories, is not covered by this warranty. 
Because of varying climatic conditions in the United States this warranty does not cover any changes 
in brass finish, including rusting, pitting, corroding, tarnishing or peeling. Brass finishes of this type 
give their longest useful life when protected from varying weather conditions. A certain amount of 
wobble is normal and should not be considered a defect.  Servicing performed by unauthorized persons 
shall render the warranty invalid. 

There is no other express warranty. The retailer hereby 

disclaims any and all warranties, including but not limited to. Those of merchantability and 
fitness for a particular purpose to the extent permitted by law.

 The duration of any implied 

warranty which cannot be disclaimed is limited to the time period as specified in the express warranty.  
Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may 
not apply to you. 

The retailer shall not be liable for incidental, consequential, or special damages 

arising out of or in connection with product use or performance except as may otherwise be 
accorded by law.

 Some states do not allow the exclusion of incidental or consequential damages, so 

the above exclusion or limitation may not apply to you. This warranty gives specific legal rights, and 
you may also have other rights which vary from state to state. This warranty supersedes all prior 
warranties. 

Lifetime Limited Warranty

529-751

219032

792145353294

 

Содержание Vasner 529-751















Отзывы: