Attach Umbrella Cap (CC) on the Umbrella Top (A) by
screwing the finial onto the threaded screw-in adapter on
the Umbrella Top. Twist until secure but, do not over
tighten.
- To assemble the two pole pieces together: Insert Bottom Pole (B)
into the Umbrella Top (A) while pressing the snap button on the
Bottom Pole (B) until the snap button locks into position.
- Turn the crank handle in clockwise direction to open the Umbrella
canopy, opposite direction to close the canopy. (TO CLOSE THE
UMBRELLA IT MUST BE IN THE UPRIGHT POSITION.)
- You can tilt the Umbrella to your desired angle while pressing the
Angle Locking button to release the Umbrella top. Release the
button to maintain the desired angle.
www.homedepot.ca
CC
A
A
B
