Finial
Screws
Bulbs
Light kit
assembly
Glass shade
Wire connection
plugs
Figure 18
NOTE:
Light bulbs have no warranty, can
be purchased at local light bulb specialty
store or from our service center.
N O T E
: B e f o r e s t a r t i n g i n s t a l l a t i o n ,
disconnect the power by turning off the
circuit breaker or removing the fuse at fuse
box.
Turning power off using the fan switch is
not sufficient to prevent electric shock.
1.
Make the polarized plug
connections: (Fig. 18)
- White to white
- Blue to black
2. Carefully push all wires back into the
switch housing, then install the light kit
assembly onto the mounting plate with 3
screws provided. Be sure to tighten all
screws. (Fig. 18)
3. Install 3 x 40W (Max.)
bulbs
(included). (Fig. 18)
4. P
lace glass shade over the light kit and
secure it with the finial provided. DO
NOT OVER TIGHTEN. (Fig. 18)
5. Restore power and your light kit is ready
for operation.
While holding the light kit assembly under
your fan,
candelabra
Installing the Light Kit 10.
Screws
Switch
housing
Switch
housing
cover
Plastic plug
Figure 19
Fan without Light Kit
(Optional)
2. Attach the extra plastic plug to the switch
housing cover. (Fig. 19)
Install the switch housing cover to the
with screws provided. (Fig. 19)
1. Disassembling the switch housing cover
from light kit originally pre-installed on
the ceiling fan.
3.
switch
housing
