HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
5
Assembly
Installation
1
Assembling the tubes and body
to the canopy
□
□
□
□
□
□
Carefully unpack the fixture and lay out all parts on a clean
surface.
Determine how many extension tubes you would like
to use. The numbers of tubes you use depends on the
length you desire for the installed light fixture.
Feed the fixture wires up through the 12 in. tubes (I),
the 6 in. tubes (H) and then the swivels (E).
Attach the desired number of tubes (H and I) to the fixture
body (J) by screwing the tubes in a clockwise direction.
Screw the two swivels (E) to the ends of the tubes (H and I),
and make sure the notches of swivels (E) are facing front.
Insert the two swivels (E) into the holes in the canopy (D),
then secure with two metal washers (C), two tooth lock
washers (B) and two nuts (A).
1
Installing the cross bar
DANGER:
Ensure the power is off at the main fuse box
prior to beginning installation.
□
□
□
□
Turn off the switch at the wall.
Turn the power off at the main fuse box.
Screw the nipple (FF) into the hole in the cross bar (BB) and
secure with a lock nut (DD).
Attach the cross bar (BB) to the ceiling outlet box using the
outlet box screws (CC).
A
B
C
D
E
F
G
H
I
J
BB
DD
CC
FF
