background image

3

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Pre-Installation

Warranty

SPECIFICATIONS

TOOLS REQUIRED

NOTE:

 These are approximate measures. They do not

include the Amps and Wattage used by the light kit.

Phillips 
screwdriver

Flat blade 
screwdriver

Adjustable 
wrench

Electrical 
tape

Wire 
cutter

Step ladder

Size

Speed

Volts

Watts

Amps

RPM

CFM

Net

Weight

Gross

Weight

Cubic Feet

44 in.

Low

Medium

High

120

9.47

28.96

62.66

0.22

0.38

0.53

69

141

204

1271

2759

3997

12.99 lbs 

(5.89 kgs)

16.89 lbs

 (7.66 kgs)

1.18 cu.ft.

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a 
lifetime after the date of purchase by the original purchaser. The supplier warrants that the light kit, excluding any glass, to be free from defects in 
workmanship and material at the time of shipment from the factory for a period of three years after the date of purchase by the original purchaser.  
The supplier also warrants that other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the 
time of shipment from the factory for a period of one year after the date of purchase by the original purchaser. We agree to correct such defects 
without charge or at our option replace with a comparable or superior model if the product is returned. To obtain warranty service, you must present 
a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage to any part, such as by 
accident, misuse, improper installation, or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions this 
warranty does not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their 
longest useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. 
Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Hampton Bay hereby disclaims 
any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law. The 
duration of any implied warranty, which cannot be disclaimed, is limited to the time period as specified in the express warranty. Some states do not 
allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, 
consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. 
Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This 
warranty gives specific legal rights, and you may also have other rights that vary from state to state. This warranty supersedes all prior warranties. 
Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.

Содержание MENA 92404





























Отзывы: