12
Hold the blade (G) with hands close to the blade arm (H),
align the key-slot holes (KK) with the blade arm posts (LL)
and press the blade down firmly. Ensure the key-slot holes
(KK) are properly seated on the blade arm posts (LL).
Firmly slide the blade (G) away from the blade arm (H) until
the blade (G) engages in the spring locking mechanism (JJ).
Make sure the spring of the spring locking mechanism (JJ)
is upward and the butt of the spring locking mechanism (JJ)
is against the edge of the blade.
Press down the spring locking mechanism (JJ) to release
the blade (G) from the blade arm (H). Slide the blade (G) toward
the blade arm (H) until the blade (G) disengages from the
spring locking mechanism (JJ). Carefully push the blade (G)
up to detach from the blade arm (H).
To install the blades to the blade arms:
To detach the blade from the blade arm:
G
G
KK
H
H
LL
9
Attaching the blades to the blade
arms
WARNING:
Failure to properly seat the blades (G) on the
blade arms (H) and engage in the spring locking mechanism (JJ)
could result in the fan blades (G) loosening and possibly falling.
NOTE:
Your fan blades are reversible. Select the blade side
finish which best accentuates your decor.
JJ
Assembly — Attaching the Fan Blades (continued)
10
Fastening the blade assemblies to
the motor
Fasten the blade assemblies to the fan motor assembly (F)
by lining up the slots (MM) of the motor with the tabs (NN) on
the blade arms (H).
Tighten the two blade arm screws with lock washers (OO)
already installed in the blade arms (H).
Repeat this procedure for the remaining blade arms (H).
WARNING:
To reduce the risk of personal injury, do not bend
the blade arms (H) while installing, balancing the blades (G),
or cleaning the fan. Do not insert foreign objects between
rotating fan blades (G).
F
H
NN
OO
MM
G