HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
11
Assembly — Hanging the Fan (continued)
Assembly — Attaching the Fan Blades
Slide the canopy (C) up to the ceiling. Make sure you have
placed the wires safely into the outlet box.
Secure the canopy (C) to the mounting bracket (A) with the
four canopy mounting screws with lock washers (DD) included
with your fan.
Raise up the canopy ring (B) and line up the four grooves
with the four screw heads on the canopy (C). Once lined up,
slide the canopy ring (B) and secure it to the canopy (C) until
snug.
7
Installing the canopy
WARNING:
Make sure the tab on the mounting bracket (A)
properly sits in the groove in the hanger ball/downrod assembly
(D) before attaching the canopy (C) to the mounting bracket (A)
by turning the canopy (C) until it drops into place.
WARNING:
The locking slots of the canopy (C) are provided
only as an aid to mounting. Do not leave the fan assembly
unattended until all four canopy mounting screws with lock
washers (DD) are engaged and firmly tightened.
DD
Outlet Box
A
DD
B
C
D
The fan motor assembly (F) is shipped with rubber packing
mount (II) to prevent movement during transportation.
Remove five screws from the rubber packing mount (II)
from the fan motor assembly (F) and discard prior to
attaching the blade (G).
8
Removing the rubber packing mounts
F
II