12
Attaching the light kit fitter assembly
1
Installing the glass shades
and bulbs
2
□
Remove the three screws (GG) on the switch cup cover of the
light kit fitter assembly (H).
□
Connect the wires from the light kit fitter assembly (H) to the
wires from the switch cup of the fan-motor assembly (E) by
connecting the molded adaptor plugs together (blue to black,
white to white). Carefully tuck all wires and splices into the
switch cup.
□
Align the three holes in the switch cup cover of the light kit
fitter assembly (H) with the three holes in the switch cup
of the fan-motor assembly (E). Make sure the notch in the
switch cup cover of the light kit fitter assembly (H) clears the
reversing switch in the switch cup of the fan-motor assembly
(E). Position the light kit fitter assembly (H) and re-install the
three screws (GG) that were removed in first step to secure
the light kit fitter assembly (H).
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
NOTE:
Notice the location of the fan’s slide switch. This is
the switch used to change the fan’s directional rotation.
For more information on the operation of this switch, see
Operating Your Fan
and Remote Control on page 15.
NOTE:
If you need an extra switch cup (or cover) for the
non-light option, please call 1-855-HD-HAMPTON
(M-F 9:00am to 4:30pm EST).
Assembly - Attaching the lights
H
GG
□
Remove the compressing ring (WW) from the threaded
socket of the light kit by turning the compressing ring
counter-clockwise until it unlocks.
□
Insert the glass shade (I) into the light kit cowling and turn
the compressing ring (WW) clockwise to tighten and secure
the glass shade. Repeat for the remaining shades.
□
With power off, screw the LED bulbs (J) into the sockets.
CAUTION:
Make sure the power is off before attaching or
removing the glass shade.
WARNING:
Allow the glass shade to cool completely before
removing.
E
J
WW
I
