HAMPTON BAY H15-NG10, Инструкция для владельца и по установке

Страница: 24 / 56

24
|
Hampton® H15-10 Direct Vent Freestanding Gas Stove
|
24
installation
RESIDENTIAL AND MANUFACTURED HOMES / MOBILE HOMES
MINIMUM HORIZONTAL TERMINATION INSTALLATIONS
Planning Your Venting Installation
See the "Exterior Vent Terminal Locations"
section for requirements.
When planning your installation, it will be necessary
to select the proper length of vent pipe for your
particular requirements. Determine the minimum
clearance to combustibles from the rear of the unit
to the wall. It is also important to note the wall thick-
ness. Before cutting the vent hole through the wall
ensure that ALL vent and termination clearances
(Refer to the "Exterior Vent Terminal Locations"
section) will be met.
*
If this is an outside corner, the minimum distance
between the vent and the outside corner is 6"
(15cm). See "F" on the diagram in the "Exterior
Vent Terminal Locations" section.
NOTE:
Ensure compliance with the outside vent
terminal location before cutting hole as both dimen-
sions must be met.
You will require the following components with your
Minimum components for a Horizontal Installation:
946-544 Horizontal Termination Kit which includes:
1 6-5/8" Dia. x 18" Black Pipe
1 4" Dia. x 18" Aluminum Vent
1 946-202 Wall Penetration Heat Shield (Wall Thimble) (2 pcs)
1 640-530/P Riser Vent Terminal
1 640-545/P Decorative Wall Trim (Black)
1 948-128 Tube Mill-Pac Screws
1 946-219/p Pipe Adaptor
380-946 Horizontal Termination Kit which includes:
1 6-5/8" Dia. x 12" Black Pipe
1 4" Dia. x 12" Aluminum Vent
1 946-202 Wall Penetration Heat Shield (Wall Thimble) (2 pcs)
1 946-523/P AstroCap
1 640-545/P Decorative Wall Trim (Black)
1 948-128 Tube Mill-Pac Screws
Optional Components:
946-204 45 o Elbow - 6-5/8" Black pipe 946-523/P AstroCap
and 4" Aluminum Vent 946-206 Vinyl Siding Standoff (AstroCap)
946-205 Vinyl Siding Shield for Riser Vent 946-506/P Vent Guard (AstroCap)
Terminal
946-208/P Vent Guard (Riser Vent Terminal)
Square Wall Thimble Cover*
Snorkel Termination (36")
Snorkel Termination (14")
Wall Penetration
Heat Shield*
* Simpson Dura-Vent Components
new Hampton
®
Direct Vent Freestanding Gas Stove. Please review your product to make sure you have
everything you need. In the event that you are missing any part, contact your dealer. Decorative brass
or chrome trim kits are available from Simpson Dura-Vent for their wall thimbles, as well as a square
wall thimble cover.
Note: These are the minimum pieces required. Other parts may be required for your particular
installation.
Kit #380-946