Hampton GC60-2 Cast Pellet Stove Technical Manual
2
Safety Note:
If this stove is not properly installed, a house fire may result. For your safety,
follow the installation instructions, contact local building, fire officials, or authority having jurisdiction
about restrictions and installation inspection requirements in your area.
The authority having jurisdiction should be consulted before installation to determine the need to
obtain a permit.
Emissions and Efficiency:
This manual describes the installation and operation of the Regency GC60-2 pellet
heater. This heater is U.S. ENVIRONMENTAL PROTECTION AGENCY certified to comply with 2020 particulate
emission standards. Under specific test condition this heater has been shown to deliver heat at rates raging from:
7,817 - 38,437 Btu/hr
Efficiency:
78%* HHV (PFS TECO 21-703)
* When using optional top vent adaptor kit (GC60-920) and 4’’ to 6’’ flue adaptor (4PVP-X6). See instruction
manual for further information.
FIRE EXTINGUISHER AND SMOKE DETECTION
: All home with a pellet burning stove should have at
least one fire extinguisher in a central location known to all the household. Smoke detectors and carbon
monoxide detectors should be installed maintained in the room containing the stove. If it sounds the alarm,
correct the cause but do not deactivate. You may choose to relocate the smoke the smoke detection device
within the room;
DO NOT REMOVE THE SMOKE OR CARBON MONOXIDE DETECTORS FROM THE
ROOM.
WARNING:
This wood heater needs periodic inspection and repair for proper operation. It is against federal
regulation to operate this wood heater in a manner inconsistent with operating instructions in this manual.
WARNING:
This wood heater has a manufacturer set minimum low burn rate that must not be altered.
It is against federal regulations to alter this setting or other wise operate this wood heater in a manner
inconsistent with operating instructions in this manual.
