Assembly
Attaching the rear panel
9
2
IMPORTANT:
(For steps 1 through 4)
Do not fully tighten bolts until the end of Step 4.
Attaching the side panel and table leg
with M6 washers (CC) and M6 x 2 0 hex bolts (AA) using M6 hex
Attach the side panel (F) and table legs (C1 and C2 ) to the table top
Place the table top (A) upside down on a flat, smooth surface.
wrench (DD).
AA
CC
F
C1
C2
A
Attach the rear panel (G) to side panel (F) with M6 washers (CC) and M6 x 2 0 hex bolts (AA) using M6 hex wrench (DD).
AA
CC
G
1
