Finishing the Installation
Step 1
. Tuck connections neatly into ceiling outlet
box.
Step 2
. Slide the canopy up to ceiling and over
the 2 screws on hanger bracket. Rotate canopy
clockwise, next, while holding the canopy with
one hand, slide the canopy cover over the screws
and rotate clockwise until tight.
Note
: adjust the
canopy screws as necessary until the canopy and
canopy cover are snug. (Fig. 9)
6.
Figure 8
SUPPLY CIRCUIT
BLACK
BLACK
Ground
Conductor
Outlet Box
Green
Ground
Lead
Ground to
Downrod
GREEN
WHITE
WHITE
WARNING
MAKE SURE TAB AT BOTTOM OF HANGER
BRACKET IS HANGER PROPERLY SEATED IN
GROOVE OF HANGER BALL BEFOREATTACHING
CANOPY TO BRACKET. FAILURE TO PROPERLY
SEAT TAB IN GROOVE COULD CAUSE DAMAGE
TO ELECTRICAL WIRING.
Figure 9
hanger
bracket
Outlet box
Screws
Canoby
Canoby cover
