HAMPTON BAY CH-7830-03, Инструкция по использованию и уходу

Страница: 6 / 20

6
Operation
1
Adjusting the doorbell volume
The doorbell (A) has an adjustable volume control.
Press and release the “+” or “–” button to adjust the
volume one step at a time. Press and hold the “+” or
“–” button to continuously adjust the volume.
2
Adding tunes to the doorbell
The suggested tune length is 2-15 seconds. The
maximum tune length is 20 seconds. If the tune is
longer than 20 seconds, only the first 20 seconds will
play.
□ Connect the USB cable (FF) to the doorbell (A)
and the computer.
□ Locate and open the external drive folder.
□
Drag the desired tune to the doorbell (A) drive.
□
Disconnect (eject per computer operating
system) the doorbell (A) from computer.
□
Remove the USB cable (FF).
IMPORTANT: The door chime will not play when connected to the
computer.
3
Selecting a tune
The doorbell (A) allows you to customize your doorbell
sound with front door tunes. The default setting for the
front door push button (B) is “Ding-Dong”.
□
Press and release the arrow buttons to cycle
through the tune list one tune at a time (“ ”
scrolls down the list; “ ” scrolls up the list).
□ Stop when the desired tune plays. The last
tune played will play each time the front door
push button (B) is pressed.
NOTE:
To listen to the selected tune, press and release
the center button “
”.
4
Setting the wireless push
button
The wireless push button (B) has two options for tune
selection: Play the selected “FRONT” door musical
tune or play the “REAR” door designated tune (Ding).
□
Remove the single jumper (AA) inside the push
button (B) to play the selected musical tune.
□
Add the single jumper (AA) inside the push
button (B) to play only the Ding tune.
Remove jumper to Add jumper to set
set as the “FRONT” door as the “REAR” door
A
A
AA
A
B
FF