background image

8

1

2

3

4

5

6

LIGHT

FAN
OFF

Operation of your Ceiling Fan: 

Reverse function 
button

Figure 21

Figure 20

Step  1:    Make  sure  power  is  restored  to  the  fan 
unit  as  during  installation  it  was  most  likely 
turned off at the wall switch or breaker box.  

Note: 

The  fan  is  controlled  by  the  remote  system  only. 
No  other  wall  control  devices  such  as  dimmers, 
fan controls, etc. are compatible with this system.  
If there is a switch that controls the power to this 
unit make sure it is only an on/off toggle or rocker 
switch. 

Step  2:  Install  the  12volt  battery  into  the  hand 
held  transmitter  (Figure  20)  as  shown  in  (Figure 
21).    Make  sure  the  battery  is  secure  with  the 
matching  +/-  terminals. The  remote  hand  set  will 
have  illumination  lights  that  will  come  on  once  a 
function  is  pressed.  This  light  indicates  the 
remote has a good battery.  If you do  not see this 
illumination please change out the battery. 

Step  3:    Begin  testing  the  fan  functions  with  the 
remote control (Figure 20).  See operation details 
below. 
     • Fan Buttons 1-6: The higher the number the 
faster the fan should turn.  Press one time on each 
button to the desired speed.  #1 is the lowest speed 
and #6 is the highest speed.
       • Fan Off Button: Press once to turn fan off.
      • Light Button: Press once to turn light on/off.  
Hold button down for full range dimming and then 
release when the desired light output is reached. 

The  fan  comes  with  a  fully  functional  remote 
control system.  The system is preprogrammed 
at  the  factory  for  operation.    However,  if  you 
experience  any  functional  issues  it  may  be 
necessary  to  reprogram  the  remote  to  the  fan 
u n i t   ( s e e   i n s t r u c t i o n s   b e l o w   f o r  
reprogramming steps). 

Special Notes:

Step  1:   Turn  the  power  off  at  the  wall  switch 
or breaker box.  Leave power off to the unit for 
15-20 seconds, then turn back on. 

Step  2:  Press  and  hold  the  “Fan  Off”  button 
down until you see the lights on the fan blink.  
Once  you  see  the  blinks  release  the  button.   
Retest the unit.

Reprogramming Your 
Ceiling Fan:

       • 
held  you  by  the  battery  compartment  (Figure 
21).  Press  once  to  reverse  the  fan.    Note: 
C o u n t e r - C l o c k w i s e  i s  f o r  S u m m e r  a n d 
Clockwise is for Winter. 

Reverse Button: Is in the back of the hand 

Содержание CF570ER-BRD
















Отзывы: