HAMPTON BAY CF570ER-BRD, Руководство пользователя

Страница: 8 / 15

5
Making the Electrical
Connections
Remember
Follow the steps below to connect the fan to
your household wiring. Use the wire nuts
supplied with your fan. Secure the
connectors with electrical tape. Make sure
there are no loose strands or connections. to shut off the power.
1. Connect the fan supply (black) wire to the
black ceiling supply wire. (Figure 11)
2. Connect the neutral fan (white) wire t o
the w
hite neutral wire from the ceiling .
(Figure 11)
3. Connect the fan ground wire (green) and
the mounting bracket ground wire (green) to
the ground wire
. (Figure
11)
4. After connecting the wires, spread them
apart so that the green and white wires are
on one side of the outlet box and the black
wires is on the other side.
from the ceiling
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR OTHER PERSONAL INJURY.
MOUNT FAN ONLY ON AN OUTLET BOX OR
SUPPORTING SYSTEM MARKED
ACCEPTABLE FOR FAN SUPPORT.
SUPPLY CIRCUIT
Ground
Conductor
Outlet Box
Green
Ground
Lead
Ground to
Downrod
B
L
A
C
K
W
H
IT
E
W
H
IT
E
B
L
A
C
K
G
R
E
E
N
WHITE
BLACK
WHITE
Figure 11
Diagram indicates optional light kit wiring.
BLACK
Finishing the Installation
1. Tuck connections neatly into ceiling outlet box.
2.Remove one screw from the mounting bracket
and loosen the other screw around 1/4″.
3. Align the canopy up to ceiling and over the
loose screw. Place the canopy into key hole and
rotate canopy clockwise. (Figure 12)
4. Secure the canopy by using previous removed
screw and loosened screws.
5. Place the canopy cover to the canopy and
rotate canopy cover clockwise until it is locked
into right position
.
(Figure 12)
MAKE SURE TAB AT BOTTOM OF HANGER BRACKET
IS PROPERLY SEATED IN GROOVE OF HANGER BALL
BEFORE
ATTACHING CANOPY TO BRACKET. FAILURE TO
PROPERLY SEAT TAB IN GROOVE COULD CAUSE
DAMAGE TO ELECTRICAL WIRING.
WARNING
Figure 12
Outlet box
Mounting
bracket
Canopy
Screw
Canopy
cover
Lead Wires
Ball/Downrod
Assembly