HAMPTON BAY CF556A-H26, Руководство пользователя

Страница: 13 / 15

Turn on the power and check the operation of
your fan. There are three pull chains
available in your fan:
1. 3-speed pull chain- it controls the fan
speed as follows: 1 pulls- High, 2 pulls-
Medium, 3 pulls- Low, and 4 pulls- Off.
Speed settings for warm or cool weather depend on
factors such as the room size, ceiling height,
number of fans, and so on. on a lower setting
without affecting your comfort.
2. Light kit pull chain- it controls the light
kit in "ON" or "OFF".
The slide switch controls directions: forward
(switch down ) or reverse (switch up ).
Warm weather - (Forward) A downward air
flow creates a cooling effect as shown in
(Fig.18). This allows you to set your air
conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow
moves warm air off the ceiling area as shown
in (Fig.19). This allows you to set your
heating unit on a lower setting without
affecting your comfort.
NOTE
WAIT FOR FAN TO STOP BEFORE
CHANGING THE SETTING OF THE
SLIDE SWITCH.
Here are some suggestions to help you
maintain your fan
1 . B e c a u s e o f t h e f a n ' s n a t u r a l
m o v e m e n t , some connections may
become loose. Check the support
c o n n e c t i o n s , b r a c k e t s , a n d b l a d e
attachments twice a year. Make sure
they are secure. (It is not necessary to
remove fan from ceiling.)
2. Clean your fan periodically to help
maintain its new appearance over the
years. Use only a soft brush or lint-
free cloth to avoid scratching the
finish. The plating is sealed with a
lacquer to minimize discoloration or
tarnishing. Do not use water when
cleaning. This could damage the
motor, or the wood, or possibly cause
an electrical shock.
3. You can apply a light coat of furniture
p o l i s h t o t h e w o o d b l a d e s f o r
additional protection and enhanced
beauty. Cover small scratches with a
Operating Your Fan 9.
IMPORTANT
MAKE SURE THE POWER IS OFF AT THE
ELECTRICAL PANEL BOX BEFORE YOU
ATTEMPT ANY REPAIRS. REFER TO THE
SECTION "MAKING ELECTRICAL
Figure 19
Figure 18