1
1
Table Assembly
1
Connecting the table legs to the
table rim
2
Connecting the leg connector to
the table legs
□
Turn the table rim (M) upside down.
□
Attach each of the table legs (N) to the table rim (M) using
M6x18 bolts (CC) and M6 washers (EE).
NOTE
: Loosely tighten all bolts using hex wrench (MM).
□
Attach the leg connector (O) to the table legs (N) using
M6x18 bolts (CC) and M6 washers (EE).
□
Securely tighten all of the bolts on the table with the hex
wrench (MM).
3
Adding the glass
□
Turn the table right side up.
□
Check to ensure that the table is securely assembled.
□
Carefully place the glass (L) on top of the table.
Care and Cleaning
□
For best results, clean the frames with a damp cloth and dry the frames thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
□
Do not clean with abrasive materials, bleach, or solvents.
□
Store the table and chairs in a dry, sheltered place when not in use.
□
Keep the table and chairs out of fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or
wind.
M
EE
O
CC
N
EE
CC
L
