6
Motion Chair Assembly
1
Connecting the chair back to the support tube
□
Align two metal sheets (DD) of the support tube (D) over the four holes in the bottom of the chair back (C).
□
Attach the bottom of chair back (C) to the support tube (D) by inserting M8X37 hex bolts (AA), M8 washers (FF), and M8 plastic washers
(KK) through the metal sheets (DD), chair back (C), and support tube (D).
□
Secure by attaching M8 washers (FF), M8 spring washers (GG), and M8 nuts (HH) to the ends of the M8X37 hex bolts (AA).
NOTE
: Loosely tighten all bolts using wrench (LL).
FF
AA
KK
FF
GG
HH
D
C
C
D
DD
