Table Assembly
Prepare the leg assembly
1
Securing the leg assembly to the
table top
2
4
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assemble two table legs (B) to the crossbar (C) using bolts
(AA). Tighten with the hex wrench (BB).
4
Table is fully assembled
6
AA
AA
C
BB
Place the table top (A) upside down on a soft and clean surface.
Secure the leg assembly to the table top using bolts (AA).
Tighten with the hex wrench (BB).
B
Your table is now ready to use.
Pulling the butterflies to the extend
position
Carefully turn the butterflies around their axis to fully open until
they securely rest on the table top.
3
Extending the table to full length
Adjust the table’s balance with the leveler under each leg.
5
Inserting the wooden umbrella cover
Insert the wooden umbrella cover (D) into the center of the table.
Engage all the locks under the table top on both sides to
keep all parts firmly fixed.
Push the table leaves to closing position until they tightly fix
to the butterflies.
AA
AA
AA
BB
.
.
.
D
With assistance, carefully turn the table to the upright position.
Release the locks on both sides and pull the leaves to fully
extended position.
