11
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Attaching the Fan Blades (continued)
Assembly - Fan without Light Kit
Attaching the switch cup
Fastening the blade assemblies to
the motor
10
9
□
Remove the three screws from the black bracket below the
fan motor assembly (D).
□
Connect the wires from the switch cup (E) to the wires
from the black bracket below the fan motor assembly (D)
by connecting the molded adaptor plugs together. Carefully
tuck all wires and splices in the switch cup.
□
Position the switch cup (E) on the black bracket below the
fan motor assembly (D) and align the three holes in the
black bracket.
□
Re-install the three screws removed in the step 1 to secure
the switch cup (E).
□
Fasten the blade assembly to the motor (D) by inserting the
alignment post into the slot on the bottom of the motor (D)
and tightening the blade bracket screws (TT). Please note
that the blade bracket screws (TT) are pre-attached into the
blade bracket (H).
□
Repeat this step for the remaining blade assemblies.
D
TT
H
D
E
