9
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Hanging the Fan (continued)
Making the electrical connection
3
□
The fan comes with 54 in. lead wires for use with an extended
ball/downrod assembly. If using the 4.5 in. ball/downrod
assembly (D) provided, you can cut the lead wires to your
desired length (no shorter than 12 in.) This will make extra
room in the canopy (B), if you do not wish to cut the wires,
you will need to neatly wrap them.
□
Connect the ground conductor of the 120-Volt supply (this
may be a bare wire or a wire with green colored insulation)
to the green ground lead(s) of the fan. There are two green
grounding leads; one from the ceiling mounting bracket and
one from the ball/downrod assembly.
□
Connect the fan motor white wire to the household white wire
using a wire connecting nut (BB).
□
Connect the fan motor black and blue wires to the household
black wire using a wire connecting nut (BB).
□
Secure each wire connecting nut using electrical tape.
□
Turn the wire connecting nut (BB) upward and push the wiring
into the outlet box (MM).
IMPORTANT:
Use the wire connecting nuts (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
NOTE:
The fan comes with 54 in. lead wires for use with an
extended ball/downrod assembly. If using the 4.5 in. ball/
downrod assembly (D) provided, you can cut the lead wires to
your desired length (no shorter than 12 in.).
WARNING:
Remove the rubber motor stops on the bottom of
the fan before installing the blades or testing the motor.
in the ceiling
Black
MM
Green or Bare
Outletbox
White
Green
Black
Blue
A
D
B
E
BB
