8.
Rubber
washer
Blade
arm
Figure 14
Blade
Screws
Attaching the Fan
Blades
Step 1
Attach the blades to the blade arms
using three screws and rubber washers as
shown in Figure 14. Start a screw into the arm,
do not tighten. Repeat for the 2 remaining
screws and washers.
Step 2
Tighten each screw securely starting
with the center screw. Make sure the blade is
straight.
Step 3
Fasten the blade arms to the motor by
inserting the tab from the blade arms to the slot
in the bottom motor housing, then tighten the
two screws and washers already installed in the
blade arms (Figure 15).
Step 4
Install an optional light kit if you wish.
Follow the instructions included with the kit.
Figure 15
Motor
Blade arm
Slot
Tab
