![background image](http://html.mh-extra.com/html/hampton-bay/3573954/3573954_use-and-care-manual_587878010.webp)
10
Assembly — Close-to-Ceiling Mounting
1
2
3
Assembling the Fan
Preparing the Motor
Preparing the Canopy
□
Remove the mounting bracket (A) from the canopy (B)
by loosening the four mounting bracket screws (BB)
on the top of the canopy (B). Remove the two
non-slotted mounting bracket screws (BB) and loosen
the slotted mounting bracket screws (BB).
□
Remove the canopy bottom cover (C) from the canopy
(B).
□
Remove three of the six collar mounting screws with
lock washers (GG) (every other one) from the collar
on top of the fan motor assembly (E).
□
Make sure the slot openings are on top, and then
place the canopy (B) over the collar at the top of the
fan motor assembly (E).
□
Align the mounting holes in the bottom of the canopy
(B) with the holes in the top of the fan motor assem-
bly (E), then fasten using the three collar mounting
screws with lock washers (GG) previously removed.
□
Securely tighten the collar mounting screws (GG).
WARNING:
Failure to completely tighten the three collar
mounting screws (GG) could result in the fan becoming loose
and possibly falling.
B
E
GG
GG
E
C
A
BB
BB
B